Versatile, customizable, and easy to transport
Compact and lightweight, AIR15 active loudspeakers provide a rich, extended low-end and natural high-frequency extension in an enclosure that will easily fit in the backseat of a small car.
Backed by 1,200W (dynamic) of Class D/Class AB power and enhanced with easy-to-use digital tuning functions, the AIR15 gives you all the power and tools you need for both mobile and installed sound.
The best of two worlds
Each type of power amplifier has advantages and disadvantages. By employing different amplifier types for each driver, AIR15 loudspeakers use the respective strengths of Class D and Class A/B amplifiers to provide optimal response throughout the speaker’s frequency range.
A 500W (continuous), Class D amplifier powers the 15-inch low-frequency driver, providing efficient, clean low end when you need it.
A 200W (continuous), Class AB amplifier powers the 1.35-inch high-frequency driver, delivering a natural sounding, "AIR-y" high end.
The combination can deliver up to 124 dB SPL of sweet, clear sound between 47 Hz and 20 kHz.
Fast and easy customization
The AIR15 loudspeaker is equipped with an easy-to-use signal processor that makes it simple to customize your loudspeakers with the push of a button.
Presets customize the AIR15’s response for use as front-of-house mains; as monitor wedges; for music playback (e.g., for DJs); for enhanced low end and a warmer sound; and for improved speech intelligibility.
Treble and bass controls let you boost or cut by 10 dB to compensate for room anomalies. Location presets let you optimize performance for stand and bracket mounting as well as flown installations.
Versatile mounting for a variety of applications
The AIR15’s molded plastic cabinet can be mounted in several ways, providing tremendous versatility.
The multi-angle enclosure sports nonskid rubber feet on the bottom for upright front-of-house use and nonskid rubber feet on one side for stage monitor applications. Rig the speaker using M10 fly points, yoke-mount it to walls or beams, or ground-stack it for portable applications.
Mount it on a tripod or atop an AIR-series subwoofer using an optional sub pole. The integrated dual-position pole mount lets you aim the speaker level or at a 7.5˚ downward tilt. And the AIR10 is easy to transport, thanks to its top-mounted handle.
AIR-series full-range loudspeakers offer a choice of inputs so you can use them with a variety of sources.
You get two combo XLR mic/TRS line inputs, each with a Class A microphone preamplifier and independent gain control.
A stereo 1/8” connection admits signals from smartphones, tablets, and other consumer audio devices.
These signals can be combined with the AIR15’s internal mixer, and a balanced XLR Mix output lets you send pass the signals to other AIR-series loudspeakers.
Hybrid “best of both worlds” 1,200W (peak) power amp configuration:
Low-frequency driver: 900W, Class D amplifier
High-frequency driver: 300W, Class A/B amplifier
Maximum SPL 124 dB peak
1.35-inch, high-frequency compression driver
15-inch woofer with a 2.5-inch voice coil
45 Hz to 20 kHz frequency response
124 dB SPL (max)
90° x 60° (horizontal x vertical) dispersion pattern
Onboard mixer with two combo XLR and ¼” inputs and one summed balanced output
Easy-to-use DSP performance presets:
FOH—normal front-of-house o Enhance – enhanced low end for a warmer sound
Monitor – optimized for floor wedge placement
Speech—applications where speech intelligibility is critical
Additional presets and controls:
Stand—for mounting on a pole or tripod
Bracket - for wall-mount applications
Suspend – for suspended applications
Multi-angle enclosure for mains or monitor-wedge applications
Comfortable ergonomic handle
35 mm pole socket with 7.5˚ downward tilt
M10 rigging points for suspended installation
Defeatable front-panel LED
Rugged plastic enclosure
Tour-grade, 1.2 mm steel grille
Configuration Active 2-way
Frequency Range (-3 dB) 47 Hz to 20 kHz
Frequency Range (-10 dB) 40 Hz to 20 kHz
Maximum Output 124 dB SPL
Nominal Dispersion (HxV) 90˚x 60˚
LF Driver 15” (2,5” voice coil)
HF Driver 1,35” compression
Amplifier Type Class D (LF), Class AB (HF)
Total System Power 1,200W (Peak)
LF Power 900W
HF Power 300W
Connections and Controls
Inputs 2 x XLR/TRS mic/line combo; 1 x 1/8” TRS stereo
Outputs 1 x XLR Mix Out
DSP Features LCD screen with EQ and multiple presets
Cabinet H-PP molded
Grille 1.2 mm steel
Handles 1 top, 1 side
Flypoints 2 top, 1 back
Pole Mounting Dual position (0˚, 7.5˚)*
Dimensions (H x W x D) 500 mm x 470 mm x 781 mm
Weight 21 kg
Power Input 115V / 230V ~50/60 switchable
Maximum Current 3.5A (230V-50 Hz), 7A (120V)
As a commitment to constant improvement, PreSonus® Audio Electronics, Inc., reserves the right to change any specification stated herein, at any time, without notification.
*AIR Speaker mounts are compatible with M20-threaded screw poles with a diameter of 33 mm and a length of 31.5"